2019 Jaguar XJS — VIN SAJNV4841KC157397

THE HIGH TENSION LEAD FROM THE IGNITION COIL CAN MOVE FROM THE PRODUCTION LOCATION CLOSER TO THE #4A FUEL INJECTOR HOSE. THIS COULD LEAD TO THE OUTER AND INNER INJECTOR HOSES CRACKING OR SPLITTING FROM OZONE DETERIORATION.

SPLITTING OF THE INJECTOR HOSES WOULD CAUSE EXPULSION OFFUEL IN THE ENGINE COMPARTMENT AND RESULT IN A FIRE WHEN EXPOSED TO A SOURCE OFIGNITION.

REPLACE THE HIGH TENSION LEADS WITH SHORTER HIGH TENSION LEADS. REPLACE BOTH THE FUEL INJECTOR AND THE #4A FUEL INJECTOR HOSE AS NECESSARY.

THE NORMAL LOCKUP FUNCTION OF THE AUTOMATIC (PASSIVE) BELT REEL CAN CAUSE THE BELT MOTOR WINCH ASSEMBLY TO LOCKUP SUCH THAT THE PASSIVE BELT SYSTEM WILL NOT DEPLOY/FUNCTION OR GETS STUCK AT VARIOUS POINTS ALONG THE TRACK CAUSING THE KINKING OR BREAKING OF ITS CABLE OR DETACHMENT OF THE TONGUE.

IF THIS OCCURS THE OCCUPANTS OF THE VEHICLE CANNOT USETHE SAFETY BELTS, INCREASING THE RISK OF INJURY IN THE EVENT OF A SUDDEN STOPOR ACCIDENT.

JAGUAR WILL REPAIR THE PASSIVE BELT SYSTEM IF THIS PROBLEM OCCURS OR HAS OCCURRED. JAGUAR WILL NOTIFY OWNERS OF THE EXISTENCE OF A LIFETIME WARRANTY ON COMPONENTS OF THE AUTOMATIC (PASSIVE) BELT SYSTEM.

EXCESSIVE FUEL VAPOR PRESSURE CAN OCCUR THAT, AFTER PROLONGED CYCLING, COULD WEAKEN THE FUEL TANK STRUCTURE.

THIS CAN CAUSE FUEL TANK LEAKS WHICH, IN THE PRESENCE OFAN IGNITION SOURCE, COULD RESULT IN A VEHICLE FIRE.

INSTALL A REVISED FUEL PURGE SYSTEM WHICH ELIMINATES EXCESSIVE VAPOR PRESSURE BUILD-UP.

ELECTRONICALLY CONTROLLED VALVES IN THE CRUISE CONTROL ACTUATOR MAY NOT FUNCTION PROPERLY DUE TO DIRT ENTERING THE VALVES.

CRUISE CONTROL WOULD NOT DISENGAGE UNDER NORMAL OPERATINGCONDITIONS WHICH COULD RESULT IN LOSS OF CONTROL AND AN ACCIDENT.

REPLACE CRUISE CONTROL ACTUATOR AND INSTALL ADDITIONAL VACUUM DUMP VALVE.