JHMRA3861WC005096

Available vehicle information

VIN
JHMRA3861WC005096
Make
Honda
Model year
1998
Country
Japan
Record status
frame damage

VIN structure

JHM WMI · RA3861 VDS · WC005096 VIS
WMI JHM World Manufacturer Identifier
VDS RA3861 Vehicle Descriptor Section
VIS WC005096 Vehicle Identifier Section
Model year code W Position 10 of the VIN
Plant code C Position 11 of the VIN
VIN length 17 characters Standard modern VIN format

The first three characters form the World Manufacturer Identifier (WMI). Characters 4–9 form the Vehicle Descriptor Section (VDS), while characters 10–17 form the Vehicle Identifier Section (VIS).

OFFICIAL U.S. GOVERNMENT DATA

NHTSA Vehicle Data

NHTSA
Make HONDA
Model Odyssey
Model year 1998
Manufacturer HONDA MOTOR CO., LTD.
Vehicle type PASSENGER CAR
Body class Minivan
Trim LX
Engine model F23A7
Displacement 2.261414832 L
Cylinders 4
Engine power 150.00 hp
Fuel type Gasoline
Transmission Automatic
Transmission speeds 4
Doors 4
Plant city SAYAMA
Plant state SAITAMA
Plant country JAPAN
Source: NHTSA vPIC
NHTSA SAFETY DATABASE

Safety Recall Campaigns

4
4 recall campaigns found for this vehicle's make, model and model year.
Recall 1 20V026000

AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

Report received: 17/01/2020

Summary

Honda (American Honda Motor Co.) is recalling certain 1998 Acura 2.2CL, 1998-1999 Acura 2.3CL, 1998-1999 Acura 3.0CL, 2001 Acura 3.2CL and Acura MDX, 1998-2000 Honda Accord Coupe, Accord Sedan, Civic Sedan, Odyssey and Acura 3.5RL, 1999-2000 Acura 3.2TL, 1996-2000 Civic Coupe, 1997-2000 CR-V, 1997-1998 EV Plus, and 1998-1999 Isuzu Oasis vehicles. These vehicles were equipped with Non-Azide Driver air bag Inflators (NADI) and do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb moisture, causing the inflators to rupture or the air bag cushion to underinflate.

Consequence

In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. An underinflated air bag cushion may not properly protect the occupant. These scenarios increase the risk of serious injury or death.

Remedy

Honda will notify owners, and dealers will inspect the driver frontal air bag inflator, and replace it if necessary, with an inflator of a different design, free of charge. The recall began October 1, 2020. Owners may contact American Honda's Customer Support & Campaign Center at 1-888-234-2138 or Isuzu customer service at 1-800-255-6727.

Recall 2 09E012000

EXTERIOR LIGHTING

Report received: 07/04/2009

Summary

SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.

Consequence

DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.

Remedy

SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.

Recall 3 02V120000

ELECTRICAL SYSTEM:IGNITION:SWITCH

Report received: 16/05/2002

Summary

ON CERTAIN SEDANS, COUPES, HATCHBACKS, AND SPORT UTILITY VEHICLES, ELECTRICAL CONTACTS IN THE IGNITION SWITCH CAN DEGRADE DUE TO THE HIGH ELECTRICAL CURRENT PASSING THROUGH THE SWITCH WHEN THE VEHICLE IS STARTED.

Consequence

WORN CONTACTS COULD CAUSE THE ENGINE TO STALL WITHOUT WARNING, INCREASING THE RISK OF A CRASH.

Remedy

DEALERS WILL REPLACE THE IGNITION SWITCH. OWNER NOTIFICATION BEGAN JUNE 14, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HONDA AT 1-800-999-1009 OR ACURA AT 1-800-382-2238.

Recall 4 99V069000

SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT

Report received: 10/05/1999

Summary

VEHICLE DESCRIPTION: PASSENGER VEHICLES. CERTAIN VEHICLES WERE MANUFACTURED WITH BALL JOINTS THAT CAN PREMATURELY WEAR OUT AND, IN THE WORSE CASE, THE BALL JOINT WOULD SEPARATE CAUSING THE FRONT SUSPENSION TO COLLAPSE.

Consequence

THIS CONDITION WOULD RESULT IN VEHICLE DECELERATION AND A SUDDEN LOSS OF POWER. ALSO STEERING CONTROLLABILITY WOULD BE REDUCED.

Remedy

DEALERS WILL REPLACE THE FRONT SUSPENSION LOWER BALL JOINTS.

Important: Campaigns shown above are matched using make, model and model year. This does not prove that this exact VIN is included in a campaign. Check the exact VIN on NHTSA →

About VIN JHMRA3861WC005096

World Crash Archive currently associates VIN JHMRA3861WC005096 with a 1998 Honda. The available archive information lists Japan as the vehicle country and frame damage as the record status.

VEHICLE RESEARCH GUIDANCE

VIN JHMRA3861WC005096 research information

This page contains the vehicle information currently available in the public archive for VIN JHMRA3861WC005096 .

The amount of information available may vary according to the vehicle, country, original source and historical period. Some records contain detailed specifications, while others contain only the VIN.

Compare the VIN displayed here with the dashboard, vehicle body, registration documents, insurance documents and any seller-provided history report.

The presence of a VIN in this archive does not by itself confirm the current mechanical, legal, financial or structural condition of the vehicle.

Before purchasing, obtain an official vehicle-history report and arrange an independent professional inspection.

VIN Theft & Fraud Check

Check this VIN using NICB VINCheck, a free service provided by the National Insurance Crime Bureau (NICB) to help identify vehicles reported as stolen or with certain insurance theft or salvage records.

Check VIN on NICB VINCheck →

Request VIN review or removal