1M2AA06Y5LW002760
1990
Available vehicle information
VIN structure
The first three characters form the World Manufacturer Identifier (WMI). Characters 4–9 form the Vehicle Descriptor Section (VDS), while characters 10–17 form the Vehicle Identifier Section (VIS).
NHTSA Vehicle Data
Safety Recall Campaigns
TRAILER HITCHES:FIFTH WHEEL ASSEMBLY
Report received: 11/05/2000
VEHICLE DESCRIPTION: HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH FONTAINE FIFTH WHEEL ASSEMBLIES. THE FIFTH WHEEL MOUNTING PLATES CAN CRACK.
UNDER THE TRAILER LOADING, THE MOUNTING PLATE COULD EVENTUALLY FAIL DUE TO FATIGUE.
DEALERS WILL INSPECT AND REPLACE THE MOUNTING PLATES THAT ARE CRACKED.
VEHICLE SPEED CONTROL
Report received: 15/02/1994
FUEL INJECTION SYSTEM RECONFIGURATION TO COMPLY WITH ENGINE EMISSION STANDARDS CAUSE HIGHER ENGINE VIBRATION LEVELS WHICH LEAD TO EARLY WEAR AND COMPLETE FAILURE OF THE SECONDARY THROTTLE RETURN MECHANISM.
IN THE EVENT THE PRIMARY THROTTLE RETURN FAILS, FAILURE OF THE SECONDARY THROTTLE RETURN SYSTEM WOULD NOT PROVIDE PROTECTION AGAINST LOSS OF THROTTLE CONTROL.
A NEW PRODUCTION SECONDARY THROTTLE RETURN SYSTEM CONFIGURATION WILL BE INSTALLED.
POWER TRAIN:DRIVELINE:CENTER SUPPORT BEARING
Report received: 01/11/1994
THE DRIVESHAFT CENTER BEARING SUPPORT BRACKET CAN CRACK AND BREAK.
IF THIS HAPPENS, THE DRIVESHAFT WILL WOBBLE AND CAN SEPARATE. SEPARATION CAN RESULT IN DAMAGE TO OTHER COMPONENTS OF THE VEHICLE OR LOOSE FRAGMENTS CAN FALL ONTO THE ROADWAY PRESENTING A HAZARD TO OTHER DRIVERS.
DEALERS WILL REPLACE THE CENTER BEARING HANGER BRACKET.
STEERING:LINKAGES
Report received: 12/03/1990
THE UPPER AND LOWER PINCH BOLT ON THE STEERING PITMAN ARM AND THE LOWER PINCH BOLT CONNECTION ON SHEPHARD POWER GEARS WERE NOT TORQUED CORRECTLY.
PINCH BOLT COULD LOOSEN AND BREAK; THIS COULD CAUSE LOSS OF TRUCK STEERING CONTROL AND RESULT IN A CRASH.
INSTALL ENGLISH HEX HEAD BOLTS AND FLAT WASHERS; TORQUE PINCH BOLTS TO SPECIFICATIONS.
SEAT BELTS:FRONT:ANCHORAGE
Report received: 25/06/1991
LAP AND SHOULDER SEAT BELT ARRANGEMENT FOR FIXED (NON-SUSPENSION) SEATS DOES NOT MEET THE SEAT BELT LOADING REQUIREMENTS OF FMVSS 210. THE INBOARD CLINCH NUT IN CAB SILL, WHERE THE BUCKLE FOR THE SHOULDER AND LAP BELT IS MOUNTED, PULLED OUT OF THE SILL DURING THE TESTS. CONSEQUENCE OF DEFECT: IF SEAT BELT ANCHIRAGE FAILS, THE SEAT OCCUPANT FACES AN INCREASED RISK OF INJURY IN AN ACCIDENT OR SUDDEN STOP.
RELOCATE THE INBOARD SEAT BELT MOUNTING FROM TOP OF THE SILL TO THE FORWARD FLANGE OF THE SILL ON THE CAB FLOOR, AND ADD A 3MM FILLET WELD AROUND THE 2 INBOARD CLINCH NUTS.
About VIN 1M2AA06Y5LW002760
World Crash Archive currently associates VIN 1M2AA06Y5LW002760 with a 1990. The available archive information lists United States as the vehicle country and hail damage as the record status.
VIN 1M2AA06Y5LW002760 research information
This page contains the vehicle information currently available in the public archive for VIN 1M2AA06Y5LW002760 .
The amount of information available may vary according to the vehicle, country, original source and historical period. Some records contain detailed specifications, while others contain only the VIN.
Compare the VIN displayed here with the dashboard, vehicle body, registration documents, insurance documents and any seller-provided history report.
The presence of a VIN in this archive does not by itself confirm the current mechanical, legal, financial or structural condition of the vehicle.
Before purchasing, obtain an official vehicle-history report and arrange an independent professional inspection.
VIN Theft & Fraud Check
Check this VIN using NICB VINCheck, a free service provided by the National Insurance Crime Bureau (NICB) to help identify vehicles reported as stolen or with certain insurance theft or salvage records.