1G8ZF5286YZ129710
Available vehicle information
Safety Recall Campaigns
Recall 1
EXTERIOR LIGHTING
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.
SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
Recall 2
STRUCTURE:BODY:BUMPERS
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THESE VEHICLES DO NOT COMPLY WITH REQUIREMENTS OF FMVSS NO. 581, "BUMPER STANDARD." THESE VEHICLES WERE PRODUCED WITH REAR BUMPER FASTENERS THAT MAY BE LOOSE OR MISSING.
IF THE FASTENERS ARE LOOSE OR MISSING, THE REAR BUMPER MAY NOT ABSORB ENERGY AS IT WAS DESIGNED TO DO IN THE EVENT OF A REAR END COLLISION.
DEALERS WILL VERIFY THAT THE REAR BUMPER BEAM FASTENERS ARE PRESENT AND PROPERLY TIGHTENED AND, IF MISSING, INSTALL NEW FASTENERS.
Recall 3
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THESE VEHICLES DO NOT COMPLY WITH REQUIREMENTS OF FMVSS NO. 135, "PASSENGER CAR BRAKE SYSTEMS." THESE VEHICLES WERE PRODUCED WITH BRAKE PIPE ATTACHMENT NUTS THAT MAY NOT BE TIGHTENED TO SPECIFICATIONS.
IF THE BRAKE PIPE NUTS ARE NOT PROPERLY TIGHTENED, BRAKE FLUID LEAKAGE COULD OCCUR, INCREASING THE BRAKE'S STOPPING DISTANCE.
DEALERS WILL INSPECT THE BRAKE PIPE NUTS FOR LEAKAGE, VERIFY THEY ARE TIGHTENED TO SPECIFICATIONS, AND REPLACE THE BRAKE PIPES IF NEEDED.
Recall 4
UNKNOWN OR OTHER
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THESE VEHICLES DO NOT COMPLY WITH REQUIREMENTS OF FMVSS NO. 208, "OCCUPANT CRASH PROTECTION." SOME OF THESE VEHICLES WERE MANUFACTURED WITH WELDS IN THE INSTRUMENT PANEL CARRIER ASSEMBLY THAT DO NOT MEET SATURN QUALITY STANDARDS.
A FRONT SEAT OCCUPANT, PARTICULARLY AN UNBELTED OCCUPANT, MAY HAVE AN INCREASED RISK OF INJURY IN A FRONTAL CRASH.
DEALERS WILL REPAIR THE VEHICLE'S INSTRUMENT PANEL CARRIER ASSEMBLY.
Recall 5
POWER TRAIN:AUTOMATIC TRANSMISSION:PARK/NEUTRAL START INTERLOCK SWITCH
VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES, EQUIPPED WITH AUTOMATIC TRANSAXLES, FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 114, "THEFT PROTECTION." THESE VEHICLES WERE BUILT WITH AN IMPROPERLY ADJUSTED AUTOMATIC TRANSAXLE PARK LOCK CABLE ASSEMBLY. IF IMPROPERLY ADJUSTED, IT IS POSSIBLE TO SHIFT FROM THE "PARK" POSITION WITH THE IGNITION KEY REMOVED.
THIS CONDITION INCREASES THE RISK OF A CRASH RESULTING FROM THE UNINTENDED MOVEMENT OF PARKED VEHICLES.
SATURN IS ASKING OWNERS AND RETAILERS TO PERFORM A FUNCTIONAL CHECK OF THE AUTOMATIC TRANSAXLE PARK LOCK CABLE ASSEMBLY OPERATION, AND IF NECESSARY, TO HAVE THE CABLE ADJUSTED. IF OWNERS ARE NOT COMFORTABLE PERFORMING THE FUNCTIONAL CHECK THEMSELVES, THEY CAN HAVE THEIR DEALER PERFORM THIS INSPECTION FOR THEM.
Recall 6
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY
VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 301, "FUEL SYSTEM INTEGRITY." THESE VEHICLES WERE BUILT WITH AN INADEQUATE VENT VALVE WELD ON THE TOP PORTION OF THE FUEL TANK.
FUEL SPILLAGE COULD OCCUR DURING REFUELING OR IF THE VEHICLE WERE INVOLVED IN A ROLLOVER. IF AN IGNITION SOURCE WERE PRESENT, A FIRE COULD OCCUR.
DEALERS WILL INSPECT THE VEHICLE TO ENSURE THE FUEL TANK VENT VALVE IS PROPERLY WELDED. IF NECESSARY, DEALERS WILL REPLACE THE FUEL TANK ASSEMBLY.
Recall 7
SEAT BELTS:FRONT:ANCHORAGE
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THESE VEHICLES DO NOT COMPLY WITH REQUIREMENTS OF FMVSS NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES." SOME OF THE VEHICLES WERE PRODUCED WITH SEAT BELT SHOULDER GUIDE ANCHOR BOLTS THAT WERE NOT ADEQUATELY TIGHTENED AT THE CENTER PILLAR AND COULD FALL OUT, MAKING THE SEAT BELT INOPERATIVE.
IN THE EVENT OF A CRASH, THE SEAT OCCUPANT MAY NOT BE PROPERLY RESTRAINED.
DEALERS WILL INSPECT THESE VEHICLES FOR PROPER INSTALLATION AND TORQUE OF THE SEAT BELT SHOULDER GUIDE ANCHOR BOLTS.
Recall 8
STRUCTURE:BODY
VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH A CONSOLE ARMREST FAIL TO COMPLY WITH REQUIREMENTS OF FMVSS NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACTS." THE ARMRESTS WERE PRODUCED WITH A LATCH THAT WILL NOT WITHSTAND THE VERTICAL FORCE REQUIREMENTS OF THE STANDARD.
IN THE EVENT OF A CRASH, THE LATCH MAY OPEN AND THE ARMREST OR THE CONTENTS OF THE CONSOLE COULD INJURE AN OCCUPANT.
DEALERS WILL REPLACE THE CONSOLE ARMREST LATCH.
EPA Fuel Economy
VIN structure
NHTSA Vehicle Data
VIN Theft & Fraud Check
Check this VIN using NICB VINCheck, a free service provided by the National Insurance Crime Bureau (NICB) to help identify vehicles reported as stolen or with certain insurance theft or salvage records.